Skip to content

Scratch Robotics

Mastery requires constant practice – Liên tục luyện tập.

  • Home
  • Courses I took
  • Contact

How to use CANbus on Teensy 3.2 (FlexCAN)

Welcome to another post on CAN hardware. As the title suggests, it’s Teensy + CANbus time. Required Hardware Teensy. I…

can bus, can bus adapter, can bus arduino, can bus low cost, teensy, teensy 3.2

Visualize Delphi ESR Radar with ROS Rviz and AutonomousStuff driver

Motivation: to understand and visualize radar information using available ROS driver. Pre-Requisites ROS (full desktop version or with Rviz ready)…

aptiv radar, aptiv radar ros, can bus radar, delphi esr 2.5, delphi esr driver, delphi esr ros, radar rviz

Setup Tensorflow GPU 1.15/2.2 on Ubuntu [2020]

Requirements Supported GPU for deep learning training (Nvidia GPU) CUDA toolkit CuDNN Conda (optional) CUDA and CuDNN Setup CUDA and…

cudnn, deep learning, latest tensorflow, setup tensorflow 2020, tensorflow, tensorflow 1.15

How to Read Lidar-Lite v3 with Jetson Nano & Arduino

Recently, while learning about available device for distance measurement/detection, I got to test out the LIDAR-Lite v3HP by Garmin. This…

2d lidar, cheap lidar, garmin lidar, hobbyist lidar, how to read lidar, how to read lidar lite v3, how to read lidar lite v3 hp, lidar, lidar arduino, lidar jetson, lidar lite v3, lidar lite v3 hp, lidar mobile robot, lidar raspberry pi, low cost lidar, object avoidance lidar, slam lidar

CAN Bus with Arduino Mkr Zero

CAN Bus on Arduino is not some new topic. There are many options for Arduino Uno, Arduino Mega or Arduino…

arduino, arduino can bus, arduino mkr, arduino mkr can bus, arduino mkr zero, can bus arduino, can bus arduino mkr, can bus arduino mkr zero, how to set up arduino can bus, how to set up arduino mkr zero can bus, mkr zero can shield

How to set up & test run Seeed Studio CAN shield on Arduino with Jetson TX2

What you need: Arduino UNO Seeeduino CAN Shield Jumper Wires A second CAN device to test (here I use Jetson…

arduino, arduino can, arduino uno, arduino uno can bus, how to arduino can bus, how to can bus seed studio, how to set up arduino can bus, seed studio, seed studio can bus, seed studio can bus shield

How to enable CAN bus on Nvidia Jetson TX2 Developer Board

I. Requirements Nvidia Jetson TX2 Developer Board Flash Jetson TX2 with Jetpack 3.2 Jumper wires 120 ohm resistor (optional) Transceivers…

how to set up jetson can bus, how to set up jetson tx2 can bus, jetson nvidia can bus, jetson tx2, jetson tx2 can, jetson tx2 can bus, jetson tx2 can bus set up, jetson tx2 ubuntu can, nvidia tx2 can bus, ubuntu can bus

Flash Jetpack on Jetson TX2 Dev Kit with Ubuntu Virtualbox VM

You land on this page because your PC is running on any other OS than the required Ubuntu version to…

jetpack flash, jetpack nvidia, jetpack virtualbox, jetpack vm, jetpack vm flash, jetson jetpack, jetson tx2, jetson virtual machine flashing, nvidia jetpack, nvidia jetson jetpack, ubuntu, ubuntu jetson, vm flash jetpack

How to Apply Basler Camera USB zerocopy patch to Linux kernel (beginner)

Heads-up: This is my very first attempt in apply a kernel patch ever for Linux. Do not recommend to try…

basler 4.x kernel, basler camera, basler patch, basler zerocopy, kernel patch, linux kernel, linux patch, patch kernel, usb zerocopy, zerocopy

CANable Pro USB CAN Adapter Review

Why? CAN bus is a common communication method that you can commonly used in automotive and robotics field for the…

automotive, can bus, can bus adapter, can to usb, can usb, communication, electronics, linux, networking, open source, Robotics, ubuntu, usb to can

Posts navigation

Older posts
Powered by WordPress.com.
Scratch Robotics
Powered by WordPress.com.
Cancel